4 Ways to Install Artificial Grass on a Budget

Would you like artificial turf for your property, but don’t want to pay the installation costs in advance? Today we’re going to show you how to install artificial grass on a budget and make adjustments along the route to reduce the cost of your installation. But make no mistake: for this to work you need to be willing to get your hands dirty, spend a lot of time and effort, and solve problems along the way. In addition, many of the solutions listed below will reduce your costs, but also increase the amount of work you need to do yourself. Even with help, use hand tools like a shovel and carry up to 50 pounds on a regular basis. Is that the kind of challenge you’re looking for? Let’s begin!

Almost every installation has four components that can be modified to minimize installation costs cheaper artificial grass without endangering the functionality or longevity of the product. They are as follows:

  1. Material waste
  2. Underground material
  3. Folding system
  4. Tools used

1. The Unknown Fact About Low Cost Subbase

After digging a few inches and installing the grass, the subsoil will go where your natural grass was. Its main purpose is to keep the natural expansion and contraction of your garden’s natural soil from damaging the lawn, which leads to wrinkles.

For most professional installations, this is one of three things:

  • Shredded other base (CMB),
  • Class II road base, or
  • Decomposed granite.

Due to its greater drainage and ability to provide a consistently flat surface, decomposed granite is considered the best of the three. Certain types of installations, such as putting greens, require a higher percentage of decomposed granite subsoil in order to function and last.

Is there a way to work around this?

In most cases, a small amount of decomposed granite can provide good performance and durability for artificial turf. In reality, only the top few inches of subsoil should contain decomposed granite for optimal water flow and performance. That means you can cover most of the excavated space with inexpensive Class II or CMB and then fill it in with a few layers of decomposed granite. This will significantly reduce the cost while getting reasonable results. However, there are certain installations where we never recommend cutting back on decomposed granite subsoil. If you get a lot of rain or already have drainage problems in your yard, this technique is unlikely to be successful.

2. Conservation of resources by reducing the amount of waste

Unless your installation area is the exact shape and size of a roll of lawn, it will be almost impossible to use up all of the grass you use in your installation. Most likely, you will have to cut and sew several pieces of grass together and some grass will be thrown. The key is how you get the most out of a 13 ‘or 15’ wide roll of lawn. One method is to ignore grain orientation. The grain orientation of artificial turf is a major cause of discarded grass. The grain orientation is the main direction that the blades of grass point.

3. The hack of suturing

As mentioned earlier, when installing artificial turf, you will most likely need to cut and sew different pieces of turf together. Most often this is done with seam tape, seam glue, and nails. This approach is the safest and most trustworthy, but also the most expensive. While the cost of seam tape and glue can be insignificant for a small installation, it can add up quickly for larger ones.

What is the low cost alternative? Just use lots of nails. This is a perfectly acceptable suturing process for some setups, although it’s not as safe. We only recommend this strategy if your lawn will not have a lot of pedestrian traffic. Nails can and will loosen over time and with sufficient foot activity. A box or two of affordable 5-inch nails would be enough if you have a large installation area that doesn’t have a lot of foot activity.

4. Cost reduction tools

There are plenty of options when it comes to specialized instruments for laying artificial turf. A plethora of tools are available to professional installers to expedite the process. However, we recommend that you ditch the expensive equipment and get back to basics with hand tools. It turns out that almost anything power tools can do can be done with simple hand tools. Replace a pickaxe for the lawn cutter, a hand compactor for the plate compactor, a pusher brush for the motorized broom, and a carpet knife for the lawn cutter. Just be prepared to work up a sweat and apply some elbow grease!

Comments are closed.